Description

Product Description

NICE RUN2500i is a 230VAC Sliding Auto Gate with Inverter Motor Only is suitable for sliding auto gates. RUN2500i comes with a ventilated auto gate motor with a built-in inverter. It is also equipped with an electromechanical gear motor with Nice BlueBUS Technology. This auto gate system runs in perfect movements in accordance with the inverter which dialogues with the control unit. Expect a smooth, quiet and safe auto gate operation with RUN2500i. Feel free to browse all kinds of compatible auto gate accessories for NICE RUN2500i on our website.

Shop for auto gates, auto gate systems, auto gate accessories, and more exclusively from Security System Asia.

Product Highlights

Ventilated motor with built-in inverter. Electromechanical gear motor with Nice BlueBUS technology.
Compatible for operation with Solemyo and Opera systems.
Simple to Install: the BlueBUS system enables connections by means of just two wires between the control unit and up to 15 control safety and signaling devices.
Safe: the acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre) are precise and reliable.
The temperature sensor: Run is able to manage force, adapting it to the different climatic and environmental conditions, while adapting the thermal cut-out protection and intensity of self-ventilation, depending on the temperature reading.
Master/Slave Selection: Automatically synchronizes 2 motors, enabling the automation of sliding gates with two opposing leaves. (built-in inverter)
Practical and Functional: built-in inverter, housed inside Run, can be simply connected by means of the practical connector guide.
Very Quiet: gear motor on bearings.
Perfect Movement: The Inverter enables the power supply and drive of the 3-phase motor with single-phase current at 230 VAC, acting on the frequency to adjust speed of the automation from a minimum of 8.2 m/min to maximum 15.4 m/min. In the automation deceleration phase, the inverter, which dialogues with the control unit, increases the torque, thus improving performance and reducing the risk of the automation blocking on impact with obstacles.