Description
Product Introduction
AJAX FireProtect
Product Highlights
Product Catalog
Product Operation Principle
The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.
Product Features
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Installation and Set Up of Product
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Product Specifications
Smoke-sensitive element | Photoelectric sensor |
Temperature sensitive element | Thermocouple |
Sound notification volume | 85 dB at a distance of 3 m |
Alarm threshold at the temperature | +59°С ±2°С |
Tamper protection | Yes |
Frequency band |
868.0 – 868.6 MHz or 868.7 – 869.2 MHz depending on the region of sale |
Compatibility |
Operates independently or with all Ajax hubs, range extenders, ocBridge Plus, uartBridge |
Maximum RF output power |
Up to 20 mW |
Radio signal modulation |
GFSK |
Radio signal range |
Up to 1,300 m (any obstacles absent) |
Power supply |
2 × CR2 (main batteries), CR2032 (backup battery), 3 V |
Battery life |
Up to 4 years |
Installation method |
Indoors |
Operating temperature range |
From 0°С to +65°С |
Operating humidity |
Up to 80% |
Overall dimensions |
132 × 132 × 31 mm |
Weight |
220 g |
AJAX FireProtect User Manual : Click Here
Product Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
What’s in the Box?
- AJAX FireProtect x 1
- SmartBracket mounting panel x 1
- Batteries CR2 (pre-installed) x 2
- Battery CR2032 (pre-installed) x 1
- Installation kit x 1
- Quick Start Guide x 1