Cart is empty 
Description
Product Highlight
- For PAS808M & PAS832
- Send Sms up to 5 phone number
- Alarm / Disarm / Clear alarm by sending Sms
- It gives options to report to the receiver of CMS
- Control and monitor the system with the mobile app
- SECOLINK PRO (set on TCP/IP or SMS communication)
- With simple SMS messages or with phone call
Product Video
Product Specification
| Features | GSV6C |
| Description | Versatile GSM/GPRS communicator |
| Product type | Alarm system module |
| In-built wired zones | Send Sms up to 5 phone number |
| On-Board (open collector type) PGM | |
| Reporting to CMS format | CID by GPRS |
| Reporting protocols for CMS | E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA |
| Compatibility with control panels via KEYBUS | PC5xx, PC14xx, PC15xx, PC16xx, PC18xx |
| Compatibility with control panels via SERIAL | SP4xxx, SP6xxx, SP7xxx, EVOxxx |
| Compatible with SG-SYSTEM II , III IP card | Yes |
| Alarm message for end user | SECOLINK PRO app, GSM call, SMS |
| Available language for voice guide | English (available other languages) |
| Available language for SMS | English (available other languages) |
| DTMF converting from PSTN to GPRS | Yes (one way) |
| Available in plastic enclosure | Yes |
| Maximum current into -PGM1 | -0.05 A |
| Maximum current into -PGM2 | -0.05 A |
| Power supply from an independent source of power: | |
| Maximum battery charging current | +0.035 A |
| Rated voltage of power supply (AC) | ~20 V |
| Minimum AC voltage | ~16 V |
| Maximum AC voltage
(Note: higher than ~22 V voltage can damage control panel) |
~22 V |
| Maximum current of slow blowing fuse used in primary AC | 250 mA |
| Maximum AC power consumption | 15 mA |
| Power supply from an Control Panel source of power: | |
| Power supply (DC) | 9 – 14 V |
| Current consumption | 50 mA |
| Current consumption with all PGM’s | 260 mA |
| Overall dimensions W x H in mm | 120 x 64 |
| Environmental compliance | ROHS |
| Operating temperature | From -10oC to +50oC |
| Interface for communicator settings programming | USB |
| Interface for communicator firmware updating | USB |
